Click to enlargeThe sound system is behind the bar in the lounge.  Power is controlled by the plug on the wall next to the cabinet, please switch off at the wall when not in use.  

• Source A - CD/USB player
• Source D - Bluetooth adapter

Bluetooth Adapter

Select Sourc D on the amplifier.  You can control the volume on your phone.  

Bluetooth Adapter - pairing button is on top

In order to pair to the adapter - 

1. Put your phone in Bluetooth pairing mode
2. Push the button on the top of the Adapter - the light should flash
3. Look for  Esinkin Audio on your phone and pair with it 

If the volume is too quiet then it may need to be adjusted on the amplifier - see the microphone instructions below but use the S button to display VOL. The VOL setting should be about -3 for use with Bluetooth.

CD / USB Player - see pic above

Select Source A on the Amplifier. Power on the CD player.

• Select CD on the CD player
  • Insert the CD gently into the slot on the left of the unit until the CD is drawn into the slot. 
• Select USB on the CD player.
  • Insert a USB stick.  MP3 files will be found and can be played

Microphone

 Turn on the mic pre amp at the button marked P on the pic below.  The mic should now work when the sliding switch is set to on.  The mic needs 2* AA bateries (unscrew the base).

Don't touch the two small up/down buttons on the mic, they change the channel (set to 16).   The mic amp must be set to the same channel - the buttons marked  C will change the channel.  The knob marked G controls the microphone gain, turning it too high will produce feedback.  To change the relative volume of the microphone use the S button on the main amp to select MIC on the display and then turn knob V to change the volume,  it is a negative scale and 0 is the loudest!